Harmonic Blocking Reactors
Reactor Manufacture as per IEC-60076 and IS-5553
Linearity more than 160 %
No joints inside the coil
Value accuracy within + 1.5% / – 0%
H class copper/aluminium wound with TIN plated copper terminals for Connections
Reactors manufactured with CRGO 0.27mm / 0.30mm thick laminations.
Winding kept open to atmosphere (surface not covered by paper or tape) for efficient cooling.
Noise level less than 60 dB at rated current.
Temperature rise not exceeding 50 – 55 degree C above ambient at rated current.
Adequate cushion provided to avoid heating due to leakage flux.
Mechanically sturdy design to withstand vibrations, keep low noise level & ensure performance guarantee.
Reactors are type tested from ERDA.
Easy Mount Capacitors
Intended for the power factor correction of small single loads where the expense and complexity of a full automatic switchboard is not warranted. Typical applications are cowsheds, irrigation pumps, small chiller rooms, individual motors in small enterprises. These capacitors are characterised by being very easy to fit and not requiring an earth connection because they are entirely plastic and fully insulated.
Up to 4.5 kVAr
Designed and manufactured in New Zealand.